FREE SHIPPING PROMO

Extractor Spring O-Ring 3 Pack For AR-15/M16

Code: EXTRACTOR O-RING

$1.50

High-stress synthetic rubber ring slips around the extractor spring to increase extractor tension for more reliable extraction. Eliminates spring "chatter" to prevent malfunctions caused by the extractor slipping off the cartridge rim. Helps ensure positive, consistent extraction during rapid-fire sequences.

  • Includes (3) O-Rings


Safety Selector AR-15

Code: Safety Selector

$11.00

Standard MilSpec AR-15, LR-308 Safety Selector.


Forward Assist Plunger Assembly AR-15

Code: Forward Assist

$10.00

Standard MilSpec AR-15 forward assist assembly.

  • * Includes plunger, forward assist pawl, forward assist spring, and retainer pin.


AR-15 Crush Washer

Code: Crush Washer AR15

$1.75

1/2" Steel Crush Washer.

Black Phosphate Matte Finish.

Will work with 5.56, .223, 9mm


Standard AR-15 Bolt Catch

Code: Bolt-Catch-AR15

$5.00

Standard MilSpec AR-15 Bolt Catch.


Charging Handle Latch Spring AR-15, LR-308

Code: Charging Handle Spring

$1.50

Standard MilSpec Charging Handle Latch Spring - AR-15, LR-308


Bolt Catch Roll Pin AR-15

Code: Roll Pin Bolt Catch

$1.00

Standard MilSpec Bolt Catch Roll Pin - 3/32


Standard A2 Pistol Grip

Code: A2-GRIP

$4.00

Standard A2 pistol grip for AR-15, M4, M16, M4A1, M16A2, M16A3,

Color - Black


Standard Carbine Buffer

Code: Buffer-Carbine

$18.00

Standard Carbine Buffer for AR-15/M4


AR-15 Hammer Spring

Code: Hammer-Spring

$1.50

Standard Industry MilSpec Hammer Spring.


AR-15 Receiver Extension Castle Nut

Code: Castle Nut

$5.00

To securely lock an end plate for AR-15/M4 style lower receiver extension tubes.


Bolt Carrier Gas Key - Chromed Lined with (2) Socket Head Screws

Code: Gas Key Set

$20.00

Heat Treated, Chrome Lined Gas Key.

Includes (1) Gas Key & (2) Grade 8 Socket Head Screws.


Standard End Plate AR-15/M4

Code: End Plate

$4.00

Standard End Plate for AR-15/M4 Lower Receiver.


M16 (EN) Electroless Nickel Complete Bolt Carrier Group

Code: BCG-EN

$140.00


Phase 5 EN (Electroless Nickel Plated) Drop In M16 Bolt Carrier Group.

***NEW deburring / polishing process which creates a smoother
slicker more advanced finish.***

The EN plated Bolt Carrier Group enhances reliability, lessens cleaning time,
improves corrosion resistance and minimizes required bolt lubrication.

- EN plated bolt carrier, heat treated & hardened.
- Hardened gas key, grade 8 hardened fasteners, type III sealing
compound.
- Black phosphate HPT/MPI bolt and extractor with Mil-Spec gas rings.

Cleaning is minimal, usually requiring only a soft cloth. Permits firing for
longer periods of time between cleaning, as dirt and powder residue has
no wet or oily surface to cling to.
EN provides a high lubricity and low friction co-efficient,
greatly increasing the life expectancy of a firearm due to reduced friction wear.

Electroless Nickel Plating (EN) is an auto-catalytic chemical technique
used to deposit a layer of nickel-phosphorus or nickel-boron alloy on
a solid workpiece, such as metal or plastic. Electroless nickel plating
is an auto-catalytic reaction used to deposit a coating of nickel on a
substrate. Unlike electroplating, it is not necessary to pass an electric
current through the solution to form a deposit. This plating technique
is to prevent corrosion and wear.
EN electroless nickel plating has several advantages versus
electroplating, it provides an even deposit regardless of workpiece
geometry, and with the proper per-plate catalyst, can deposit on non-
conductive surfaces.

***There has been a lot of talk about the pros and cons of staking the gas key on the carrier. Here is our opinion and why we do not stake keys. The US Mil Spec. assembly drawing requires the carrier key to be staked. Contrary to some popular opinions staking does not “SEAL” the gas key. Staking keeps the screws from backing out. Period.

If you do not properly torque the screws to 35 inch pounds you will be staking a screw that is loose or one that is over torqued and prone to breakage. We have seen plenty of staked screws that are loose or broken.

The Mil Spec. also calls for the gas key bottom surface to be“SEALED" with Permatex gasket sealer. Something no one does to our knowledge. Here is our procedure for installing a gas key. First clean the oil from the gas key and the mating surface on the carrier. Then clean the oil from the screw threads. We use Acetone for this. Next use a very light coating of Permatex high strength thread locker gel on the bottom of the key. PN 27010. This is much easier to use than the Permatex gasket sealer. It comes in a plastic twist dispenser. Make sure you don't use so much that it squishes into the gas port hole. The cure rate is 60 minutes. Next coat the screw threads with the same gel. Install the key and torque the screws to 35 inch pounds.

Should you decide to remove the key for some reason don't use the old screws when you put the key back on! You will most likely break them during installation or when you fire the rifle. Go to the local hardware store and buy new 10-32 x ¼"SHCS. If you feel the need to stake the screws spend the money and get one of the staking tools from Brownell that uses a screw type system to swedge the material into the top of the screw. Don't use a hammer and a punch! You can stretch the thread on the screw and now you have a loose screw that will eventually break if the gun even fires.***

Click Here for Product FAQ Page


Pistol Buffer Spring / Carbine - Enhanced

Code: PBS

$8.00

The Phase 5 Enhanced / high performance buffer spring is designed for AR pistols and standard carbine applications.

- Extra power is provided with this buffer spring as well as durability.

- Improved cycle operation which results in more consistent performance.

- Heat treated and corrosion-resistant steel wire.

- For use with AR-15/M16 rifles or pistols chambered in .223/5.56mm.

Manufactured by Phase 5 Weapon Systems Inc.  in U.S.A.


Phase 5™ 3D PVC Patch - Field Traning Green

Code: PATCH, P5 FT GREEN

$5.00

Phase 5 3D PVC Patch
Color: Field Training Phase 5™ Green
Size: 3" Tall - 2" Wide
PVC Material
Hook Velcro sewn on the back.


Phase 5™ 3D PVC Patch - Grey / Black

Code: PATCH, P5 GREY

$5.00

Phase 5 3D PVC Patch
Color: Grey / Black
Size: 3" Tall - 2" Wide
PVC Material
Hook Velcro sewn on the back.


Phase 5™ 3D PVC Patch - OD Green / Black

Code: PATCH, P5 OD GREEN

$5.00

Phase 5 3D PVC Patch
Color: OD Green / Black
Size: 3" Tall - 2" Wide
PVC Material
Hook Velcro sewn on the back.


Phase 5™ 3D PVC Patch - Tan / Brown

Code: PATCH, P5 BROWN/TAN

$5.00

Phase 5 3D PVC Patch
Color: Tan/Brown
Size: 3" Tall - 2" Wide
PVC Material
Hook Velcro sewn on the back.


Phase 5™ 3D PVC Patches - Multi 5 Pack

Code: PATCH, P5 MULTI PACK

$20.00

Phase 5 3D PVC Patch
Multi 5 Pack (one of each color)
Size: 3" Tall - 2" Wide
PVC Material
Hook Velcro sewn on the back.


COMPLETE CQC FORGED UPPER ASSEMBLY 7.5"

Code: CQC COMPLETE UPPER

$799.00

The CQC Forged Upper Assembly 7.5" (5.56mm) is built for performance and reliability with innovative components to function no matter the situation.

Features:

- Forged 7075 T6 aluminum upper receiver.

- 7.5" Lo-Pro Slope Nose (LPSN7.5) Quad Rail.

- 7.5" 4150 chrome lined, 1:7 twist, button rifled, M4 extension/M4 feed ramps with pistol length gas systems and lo-pro gas block.

- AR15 bolt carrier group - black phosphate, chrome lined.

- Battle Latch Charging Handle Assembly (BL/CHA).

- littleBOY Hex Brake

Limited Lifetime Warranty


LARGE LOGO STICKER

Code: Sticker, Large Logo

$12.99

New logo design!

This is a Super High Resolution UV coated Die Cut Sticker.

This is the perfect sticker to make the large statement on the back window of a truck or any place else!

Sticker height: 12 inches. Sold individually.


SMALL LOGO STICKER

Code: Sticker, Small Logo

$3.00

New logo design!

This is a Super High Resolution UV coated Die Cut Sticker.

This is the perfect sticker to make the large statement on the back window of a truck or any place else!

Sticker height: 4 inches. Sold individually.


AR-15 CHROME LINED BLACK PHOSPHATE COMPLETE BOLT CARRIER GROUP

Code: BCG-AR15

$110.00

Phase 5’s Mil-spec AR-15 bolt carrier features a heat treated and chrome lined inner with a black phosphate coating. The complete bolt carrier group includes cam pin, firing pin, gas key, and bolt. All bolts are HPT/MPI tested.

***There has been a lot of talk about the pros and cons of staking the gas key on the carrier. Here is our opinion and why we do not stake keys. The US Mil Spec. assembly drawing requires the carrier key to be staked. Contrary to some popular opinions staking does not “SEAL” the gas key. Staking keeps the screws from backing out. Period.

If you do not properly torque the screws to 35 inch pounds you will be staking a screw that is loose or one that is over torqued and prone to breakage. We have seen plenty of staked screws that are loose or broken.

The Mil Spec. also calls for the gas key bottom surface to be“SEALED" with Permatex gasket sealer. Something no one does to our knowledge. Here is our procedure for installing a gas key. First clean the oil from the gas key and the mating surface on the carrier. Then clean the oil from the screw threads. We use Acetone for this. Next use a very light coating of Permatex high strength thread locker gel on the bottom of the key. PN 27010. This is much easier to use than the Permatex gasket sealer. It comes in a plastic twist dispenser. Make sure you don't use so much that it squishes into the gas port hole. The cure rate is 60 minutes. Next coat the screw threads with the same gel. Install the key and torque the screws to 35 inch pounds.

Should you decide to remove the key for some reason don't use the old screws when you put the key back on! You will most likely break them during installation or when you fire the rifle. Go to the local hardware store and buy new 10-32 x ¼"SHCS. If you feel the need to stake the screws spend the money and get one of the staking tools from Brownell that uses a screw type system to swedge the material into the top of the screw. Don't use a hammer and a punch! You can stretch the thread on the screw and now you have a loose screw that will eventually break if the gun even fires.***

Click Here for Product FAQ Page

Loading...