littleBOY HexBrake
Introducing the littleBOY Hex Brake; a younger, compact version of the original FATman Hex Brake, which was also created to solve issues faced by many competition shooters and precision rifle builders. The iconic Phase 5 Hex design gives the littleBOY Hex Brake the perfect styling that custom gun builders are looking for.
PRODUCT GALLERY
PRODUCT VIDEO
PRODUCT DETAILS
PRODUCT DESCRIPTION
Introducing the littleBOY Hex Brake; a younger, compact version of the original FATman Hex Brake, which was also created to solve issues faced by many competition shooters and precision rifle builders.
Including 1 large (FAT) ventilated baffle section and chamber to create the compensation needed to reduce the overall recoil felt by the shooter.
The design of the littleBOY Hex Brake allows the chamber wall to sit as close to the barrel crown plane as possible. This design element was included to maintain the full accuracy of the barrel.
ADDITIONAL SPECS
- 1/2 x 28 TPI
- 9mm 1/2 x 28 TPI
- 5/8 x 24 TPI
- 9mm 1/2 x 36 TPI
WHAT'S INCLUDED
- (1) littleBOY Hex Brake
- (1) Crush Washer
GSA CONTRACT
COMPATIBILITY
- 1/2 x 28 TPI: 5.56mm / .223
- 9mm 1/2 x 28 TPI: 9mm / 7.62x39 / 6.8mm
- 5/8 x 24 TPI: 7.62X51 / 7.62x39 / .308 / 300blk / 6.5 Creedmoor / 6.5 GRENDEL / 6.8SPC
- 9mm 1/2 x 36 TPI: 9mm / 7.62x39 / 6.8mm
IMPORTANT COMPATIBILITY NOTES
- NFA Note: End of brake is approx. .85 in. from barrel crown to end of muzzle device with crush washer installed. We do not recommend you install this on a 14.5 in. barrel, doing so will not reach the NFA required 16 in. overall length.
PLEASE NOTE: Contact Phase 5 with questions regarding specific component combinations.
Similar Products
Phase 5 Social Media
